Control Module
CAT EMCP Generator Set Controller.
This Application and Installation Guide is intended to cover the EMCP 3 Generator Set Control and its application in generator set systems. The intended audience for this guide includes Caterpillar generator set system designers, service support personnel, Dealers and Service Technicians, and customers.
Caterpillar
Installation Manual
English
Caterpillar
Installation Manual
English
Manual Overview
CAT EMCP 3.1 3.2 3.3 Application and Installation Guide is a comprehensive technical reference for the EMCP 3 Generator Set Control system and its application in generator-set installations. The guide explains the controller architecture and then develops the information required to install, configure, operate, verify, and communicate with the control system. The document identifies the EMCP 3.1, EMCP 3.2, and EMCP 3.3 as three versions within the EMCP 3 product line, with feature differences between the controller levels.
The guide begins with general information and safety requirements before moving into installation. Its electrical installation material covers power connections, battery charger arrangements, electrical interfaces, EUI engine connections, generator winding connections, transformer connections, wiring requirements, and shielded wiring. This makes the document particularly relevant when working with Caterpillar generator set control installations where correct electrical interfacing and signal integrity are important.
The configuration and operation sections extend beyond basic wiring. They cover system parameters, engine and AC measurements, user preferences, date and time settings, generator output parameters, engine speed, idle/rated operation, starting and stopping, and verification of overspeed, low-oil-pressure, and high-coolant-temperature functions. Later sections address event-response configurations, security, setpoint structures, digital inputs, analog inputs, relay outputs, digital outputs, and optional control modules.
Technical Specs
| Parameter | Value |
|---|---|
| Control System | Electronic Modular Control Panel 3 (EMCP 3) |
| Controller Versions | EMCP 3.1, EMCP 3.2 and EMCP 3.3 |
| Publication Number | LEBE5255-01 |
| Publication Identification | 3-07 |
| Document Length | 258 pages |
| Primary Communication Interfaces | J1939 data links and related communication interfaces described in the guide |
| Technical Scope | Installation, configuration, setpoints, inputs, outputs, events, optional modules, communications and SCADA information |
Installation and Electrical Connections
The installation portion provides information needed to connect the CAT EMCP 3 controller within a generator-set electrical system. It addresses power requirements, battery charger connections, electrical connections, EUI engine interfaces, generator winding connections, transformer connections, and wiring requirements. The guide also provides dedicated information on shielded wiring, which is important for maintaining reliable electronic communication and reducing susceptibility to electrical interference.
Controller Configuration and Setpoints
The EMCP 3 controller provides configurable parameters for engine, generator, input, output, event, and communication functions. The guide explains the setpoint structure and provides information for adjusting generator-set parameters such as engine speed, generator output voltage, and idle/rated operation.
The EMCP 3 setpoints sections are particularly relevant during commissioning or controller replacement because configuration values determine how the generator control system responds to operating conditions and external inputs. The guide also describes setpoint sub-menus and configuration through the Caterpillar Service Tool.
Related Manuals
Caterpillar EMCP II+ Schematics and Wiring Diagrams
CAT EMCP II+ electrical schematics covering control circuits, auxiliary systems, protection, load sharing, and generator-set wiring.
CAT EMCP 4.1 & 4.2 Application and Installation Manual
This Manual, covers installation, wiring, configuration, monitoring, and troubleshooting of Caterpillar EMCP generator controllers.
Important Safety Notice: Before installing, operating, servicing, or troubleshooting this equipment, verify that this manual matches your exact model and serial number. Always read and follow the manufacturer's safety instructions.
Read Online
Table of Contents
Loading contents…
More From
Control Module
FG Wilson PowerWizard 2.0 Wiring Diagram
This wiring diagram showing battery, alternator, relay output, input and engine interface module connections across two sheets.
CAT EMCP 4.1 & 4.2 Application and Installation Manual
This Manual, covers installation, wiring, configuration, monitoring, and troubleshooting of Caterpillar EMCP generator controllers.
Deep Sea Electronics DSE51xx PC Software Manual
This software package contains DSE51xx Series configuration software.
Deep Sea Electronics DSE5110 Installation Instructions
This cover the physical and electrical setup needed before the DSE5110 can be commissioned.
DSE5110 Control Module Operating Manual
DSE5110 control module operating manual covering automatic generator control, engine monitoring, protection, configuration
Free, and staying that way
Saved hundreds on a technician call? A quick $3 coffee keeps this independent library running and growing.
☕ Buy the Archivist a CoffeeSpot something off?
Wrong revision, dead link, or spec that doesn't match your unit? Tell us, and we'll check it.
Report an Issue